Our Services

Platon Double Drain,

Double drain is installed with the filter fabric facing the backfill. it is fixed mechanically along its top edge using a double drain X-Cramp, which provides tear resistant fixing points. the platon top edge mould prevents entry of soil and stones between the walls and membrane or into the drainage layer.

Triton Drainage system,

The system comprises triton aqua channel (a PVC drainage conduit which is fitted around the perimeter of the floor) and the triton aqua pump kit (a mains powered submersible pump and preformed sump). The sump is located into the floor with the removable, structural lid finishing flush with the surrounding floor level. The submersible pump is then installed inside the sump and controlled by an automatic integral float switch.
Also available are a non-return valve, to avoid water backing up, and a high level water alarm, which warns of mechanical or power failure. A 12v battery back-up pump is also available.

Platon P20,

Platon P20 is a high capacity drainage membrane recommended for use on all floor applications below ground due to its ability to control free flowing water. The deep stud profile is designed to resist blockages caused by lime deposits..

Platon P5,

P5 is a tough and economically priced membrane for both remedial and new build construction. It is suitable for sub-ground tanking and also for use above ground to isolate walls which are damp or contaminated with salts.

P5 can be dry lined on walls and screeded or a floating dry board system fitted on floors.

Platon Plaster Base,

Platon plaster base can be installed on internal walls and vaulted ceilings above or below ground level. The substrate remains visible through the clear membrane for precise fixing. It is suitable for use with sand and cement renders and most lightweight and renovating plasters - However please check with triton for further product advice.